Diy American Flag Coin Holder

Diy American Flag Coin Holder

Diy American Flag Coin Holder

American Flag Coin Holder: A DIY Guide to Preserve Your Patriotic Currency

Showcasing your love for country and preserving your valuable coins simultaneously is effortlessly achievable with a DIY American flag coin holder. This time-honored keepsake seamlessly blends patriotism and practicality, allowing you to display your cherished coins while honoring the vibrant colors and symbolic significance of the American flag. Embark on this rewarding project and create a timeless heirloom that will captivate the hearts of all who behold it.

Materials Required:

  • Wooden plaque (approximately 12×16 inches or larger)
  • 50 quarters (or other coins)
  • Red, white, and blue acrylic paint
  • Paintbrushes (various sizes)
  • Wood glue
  • Sandpaper
  • Polyurethane (optional)
  • Hammer
  • Nails (optional)

Step-by-Step Instructions:

  1. Prepare the Plaque: Gently sand the wooden plaque to smoothen any rough edges. Paint the entire surface in a rich shade of blue and allow it to dry thoroughly. This will represent the blue field of the American flag.

  2. Outline the Stars: Measure and mark the approximate location of the stars on the blue field. Use a white paintbrush to carefully paint 50 five-pointed stars within the designated area. Let the paint dry completely.

  3. Create the Stripes: Divide the remaining area below the star field into 13 equal horizontal stripes. Alternate painting the stripes in red and white, starting with red at the top. Paint four red stripes and three white stripes on each side of the plaque. Allow each stripe to dry before painting the next.

  4. Attach the Quarters: Apply wood glue to the back of each quarter. Carefully position the quarters in five horizontal rows of ten coins each, starting from the bottom of the plaque. Press down firmly to secure the coins in place.

  5. Secure the Coins (Optional): If desired, you can reinforce the coins by hammering small nails through the top of each coin into the wooden plaque. This step is optional but provides added stability.

  6. Seal the Plaque (Optional): To protect your finished masterpiece, apply a thin layer of polyurethane to the entire surface. Allow the polyurethane to dry completely before displaying the coin holder.


Q: What other coins can I use besides quarters?

A: You can use any type of coin that fits snugly within the stripes, such as pennies, nickels, dimes, or half-dollars.

Q: Can I use a different size wooden plaque?

A: Yes, you can adjust the size of the wooden plaque to accommodate your desired number of coins. Simply scale up or down the measurements for the star field and stripes accordingly.

Q: How do I display the coin holder?

A: You can mount the coin holder on a wall using nails or screws. Alternatively, you can display it on a tabletop or shelf.

Q: How do I clean the coin holder?

A: Wipe the coin holder gently with a soft, clean cloth dampened with warm water. Avoid using harsh chemicals or abrasive cleaners.


Creating a DIY American flag coin holder is a rewarding and patriotic endeavor that allows you to honor your country and preserve your cherished coins. With a little patience and creativity, you can create a timeless heirloom that will be treasured for generations to come. Display your American flag coin holder with pride, knowing that you have crafted a symbol of both your love for country and your numismatic passion.


Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *